linux — security advisory
In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a pre
- Products
- linux
- Affected versions
- Not specified
- Fixed versions
- 5.17.3-1
- CVEs
- CVE-2022-49214
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 30 Oct 2026, 15:25 UTC · Revision 1
Source evidence
In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 ("powerpc/mm: Show if a bad page fault on data is read or write.") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR "to an undefined value". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon "dump" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a pre
osv:DEBIAN-CVE-2022-49214
linux
Fixed versions: 5.17.3-1
linux
Fixed versions: 5.17.3-1
linux
Fixed versions: 5.17.3-1
Complete source record
{
"id": "2bc3bdb681fa4314a4097c03337946a32ef3ef182ddde8f99088bd96d844a8e2",
"url": "https://osv.dev/vulnerability/DEBIAN-CVE-2022-49214",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "DEBIAN-CVE-2022-49214",
"summary": "In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Don't use DSISR for SLB faults Since commit 46ddcb3950a2 (\"powerpc/mm: Show if a bad page fault on data is read or write.\") we use page_fault_is_write(regs->dsisr) in __bad_page_fault() to determine if the fault is for a read or write, and change the message printed accordingly. But SLB faults, aka Data Segment Interrupts, don't set DSISR (Data Storage Interrupt Status Register) to a useful value. All ISA versions from v2.03 through v3.1 specify that the Data Segment Interrupt sets DSISR \"to an undefined value\". As far as I can see there's no mention of SLB faults setting DSISR in any BookIV content either. This manifests as accesses that should be a read being incorrectly reported as writes, for example, using the xmon \"dump\" command: 0:mon> d 0x5deadbeef0000000 5deadbeef0000000 [359526.415354][ C6] BUG: Unable to handle kernel data access on write at 0x5deadbeef0000000 [359526.415611][ C6] Faulting instruction address: 0xc00000000010a300 cpu 0x6: Vector: 380 (Data SLB Access) at [c00000000ffbf400] pc: c00000000010a300: mread+0x90/0x190 If we disassemble the PC, we see a load instruction: 0:mon> di c00000000010a300 c00000000010a300 89490000 lbz r10,0(r9) We can also see in exceptions-64s.S that the data_access_slb block doesn't set IDSISR=1, which means it doesn't load DSISR into pt_regs. So the value we're using to determine if the fault is a read/write is some stale value in pt_regs from a pre",
"evidence": "osv:DEBIAN-CVE-2022-49214",
"products": [
{
"name": {
"value": "linux",
"evidence": "/affected/0/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.17.3-1",
"evidence": "/affected/0/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.17.3-1",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/2/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.17.3-1",
"evidence": "/affected/2/ranges"
}
],
"affected_versions": []
}
],
"severity": "medium",
"structured": {
"id": "DEBIAN-CVE-2022-49214",
"aliases": [
"DEBIAN-CVE-2022-49214"
],
"metrics": [
{
"type": "CVSS_V3",
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
}
],
"affected": [
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.17.3-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
"ecosystem": "Debian:12"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49214.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.17.3-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
"ecosystem": "Debian:13"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49214.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.17.3-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=forky",
"ecosystem": "Debian:14"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49214.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
}
],
"modified": "2026-10-15T08:02:58.147913067Z",
"provider": "osv",
"upstream": [
"CVE-2022-49214"
],
"references": [
"https://security-tracker.debian.org/tracker/CVE-2022-49214"
]
},
"related_cves": [
{
"value": "CVE-2022-49214",
"evidence": "/upstream"
}
],
"security_relevant": true,
"severity_evidence": "/severity/0/score"
},
"source_id": "core-osv",
"document_id": 324764,
"published_at": "2025-02-26T07:00:58.49+00:00"
}