Skip to content
Heist/ feed
Back to feed
MediumFix available

linux — security advisory

Type: advisorySources: OSVAdvisory ID: DEBIAN-CVE-2020-36787

In the Linux kernel, the following vulnerability has been resolved: media: aspeed: fix clock handling logic Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting.

Products
linux
Affected versions
Not specified
Fixed versions
5.10.38-1
CVEs
CVE-2020-36787
Confirmed fixed CVEs
Not specified
Updated in this feed
1 Nov 2026, 13:10 UTC · Revision 1

Source evidence

DEBIAN-CVE-2020-36787

core-osv · Original source

Published 28 Feb 2024, 09:15 UTC

In the Linux kernel, the following vulnerability has been resolved: media: aspeed: fix clock handling logic Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting.

osv:DEBIAN-CVE-2020-36787

linux

Fixed versions: 5.10.38-1

linux

Fixed versions: 5.10.38-1

linux

Fixed versions: 5.10.38-1

Complete source record
{
  "id": "5981dc8922a2fdbfa42b5561518385b73b48a6446a02e3ef4f0f5c470e1d45e3",
  "url": "https://osv.dev/vulnerability/DEBIAN-CVE-2020-36787",
  "method": "structured",
  "payload": {
    "kind": "advisory",
    "title": "DEBIAN-CVE-2020-36787",
    "summary": "In the Linux kernel, the following vulnerability has been resolved: media: aspeed: fix clock handling logic Video engine uses eclk and vclk for its clock sources and its reset control is coupled with eclk so the current clock enabling sequence works like below. Enable eclk De-assert Video Engine reset 10ms delay Enable vclk It introduces improper reset on the Video Engine hardware and eventually the hardware generates unexpected DMA memory transfers that can corrupt memory region in random and sporadic patterns. This issue is observed very rarely on some specific AST2500 SoCs but it causes a critical kernel panic with making a various shape of signature so it's extremely hard to debug. Moreover, the issue is observed even when the video engine is not actively used because udevd turns on the video engine hardware for a short time to make a query in every boot. To fix this issue, this commit changes the clock handling logic to make the reset de-assertion triggered after enabling both eclk and vclk. Also, it adds clk_unprepare call for a case when probe fails. clk: ast2600: fix reset settings for eclk and vclk Video engine reset setting should be coupled with eclk to match it with the setting for previous Aspeed SoCs which is defined in clk-aspeed.c since all Aspeed SoCs are sharing a single video engine driver. Also, reset bit 6 is defined as 'Video Engine' reset in datasheet so it should be de-asserted when eclk is enabled. This commit fixes the setting.",
    "evidence": "osv:DEBIAN-CVE-2020-36787",
    "products": [
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/0/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.10.38-1",
            "evidence": "/affected/0/ranges"
          }
        ],
        "affected_versions": []
      },
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/1/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.10.38-1",
            "evidence": "/affected/1/ranges"
          }
        ],
        "affected_versions": []
      },
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/2/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.10.38-1",
            "evidence": "/affected/2/ranges"
          }
        ],
        "affected_versions": []
      }
    ],
    "severity": "medium",
    "structured": {
      "id": "DEBIAN-CVE-2020-36787",
      "aliases": [
        "DEBIAN-CVE-2020-36787"
      ],
      "metrics": [
        {
          "type": "CVSS_V3",
          "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "affected": [
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.10.38-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
            "ecosystem": "Debian:12"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2020-36787.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        },
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.10.38-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
            "ecosystem": "Debian:13"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2020-36787.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        },
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.10.38-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=forky",
            "ecosystem": "Debian:14"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2020-36787.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        }
      ],
      "modified": "2026-10-26T12:01:52.850810670Z",
      "provider": "osv",
      "upstream": [
        "CVE-2020-36787"
      ],
      "references": [
        "https://security-tracker.debian.org/tracker/CVE-2020-36787"
      ]
    },
    "related_cves": [
      {
        "value": "CVE-2020-36787",
        "evidence": "/upstream"
      }
    ],
    "security_relevant": true,
    "severity_evidence": "/severity/0/score"
  },
  "source_id": "core-osv",
  "document_id": 451888,
  "published_at": "2024-02-28T09:15:37.03+00:00"
}