linux — security advisory
In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is calle
- Products
- linux
- Affected versions
- Not specified
- Fixed versions
- 5.18.14-1
- CVEs
- CVE-2022-49647
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 30 Oct 2026, 15:41 UTC · Revision 1
Source evidence
In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is calle
osv:DEBIAN-CVE-2022-49647
linux
Fixed versions: 5.18.14-1
linux
Fixed versions: 5.18.14-1
linux
Fixed versions: 5.18.14-1
Complete source record
{
"id": "4efddf058c75c4c7def31b908c0c5173c776c304b528297d08cfbd023f0da728",
"url": "https://osv.dev/vulnerability/DEBIAN-CVE-2022-49647",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "DEBIAN-CVE-2022-49647",
"summary": "In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is calle",
"evidence": "osv:DEBIAN-CVE-2022-49647",
"products": [
{
"name": {
"value": "linux",
"evidence": "/affected/0/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.18.14-1",
"evidence": "/affected/0/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.18.14-1",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/2/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.18.14-1",
"evidence": "/affected/2/ranges"
}
],
"affected_versions": []
}
],
"severity": "high",
"structured": {
"id": "DEBIAN-CVE-2022-49647",
"aliases": [
"DEBIAN-CVE-2022-49647"
],
"metrics": [
{
"type": "CVSS_V3",
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
}
],
"affected": [
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.18.14-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
"ecosystem": "Debian:12"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49647.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.18.14-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
"ecosystem": "Debian:13"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49647.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.18.14-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=forky",
"ecosystem": "Debian:14"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49647.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
}
],
"modified": "2026-10-15T08:03:11.831324596Z",
"provider": "osv",
"upstream": [
"CVE-2022-49647"
],
"references": [
"https://security-tracker.debian.org/tracker/CVE-2022-49647"
]
},
"related_cves": [
{
"value": "CVE-2022-49647",
"evidence": "/upstream"
}
],
"security_relevant": true,
"severity_evidence": "/severity/0/score"
},
"source_id": "core-osv",
"document_id": 325665,
"published_at": "2025-02-26T07:01:39.863+00:00"
}