linux — security advisory
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested
- Products
- linux
- Affected versions
- Not specified
- Fixed versions
- 6.9.7-1
- CVEs
- CVE-2024-58238
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 30 Oct 2026, 19:59 UTC · Revision 1
Source evidence
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested
osv:DEBIAN-CVE-2024-58238
linux
Fixed versions: 6.9.7-1
linux
Fixed versions: 6.9.7-1
Complete source record
{
"id": "056bb85d312938148299676696af5cfded4243315ae24156733a7d4399c5f220",
"url": "https://osv.dev/vulnerability/DEBIAN-CVE-2024-58238",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "DEBIAN-CVE-2024-58238",
"summary": "In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00 Can't set advertise mode on hci0: Connection timed out (110) Bluetooth: hci0: command 0x200a tx timeout When the power save mechanism turns on UART break, and btnxpuart_tx_work() is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE, which prevents the psdata->work from being scheduled, which is responsible to turn OFF UART break. This issue is fixed by adding a ps_lock mutex around UART break on/off as well as around ps_state read/write. btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is PS_STATE_SLEEP, it will first schedule psdata->work, and then it will reschedule itself once UART break has been turned off and ps_state is PS_STATE_AWAKE. Tested ",
"evidence": "osv:DEBIAN-CVE-2024-58238",
"products": [
{
"name": {
"value": "linux",
"evidence": "/affected/0/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.9.7-1",
"evidence": "/affected/0/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.9.7-1",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
}
],
"severity": "medium",
"structured": {
"id": "DEBIAN-CVE-2024-58238",
"aliases": [
"DEBIAN-CVE-2024-58238"
],
"metrics": [
{
"type": "CVSS_V3",
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
}
],
"affected": [
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "6.9.7-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
"ecosystem": "Debian:13"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2024-58238.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "6.9.7-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=forky",
"ecosystem": "Debian:14"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2024-58238.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
}
],
"modified": "2026-10-16T09:47:31.992626753Z",
"provider": "osv",
"upstream": [
"CVE-2024-58238"
],
"references": [
"https://security-tracker.debian.org/tracker/CVE-2024-58238"
]
},
"related_cves": [
{
"value": "CVE-2024-58238",
"evidence": "/upstream"
}
],
"security_relevant": true,
"severity_evidence": "/severity/0/score"
},
"source_id": "core-osv",
"document_id": 338625,
"published_at": "2025-08-09T15:15:27.893+00:00"
}