Skip to content
Heist/ feed
Back to feed
MediumFix available

linux — security advisory

Type: advisorySources: OSVAdvisory ID: DEBIAN-CVE-2022-49613

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix PM usage_count for console handover When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because

Products
linux
Affected versions
Not specified
Fixed versions
5.18.14-1
CVEs
CVE-2022-49613
Confirmed fixed CVEs
Not specified
Updated in this feed
30 Oct 2026, 15:41 UTC · Revision 1

Source evidence

DEBIAN-CVE-2022-49613

core-osv · Original source

Published 26 Feb 2025, 07:01 UTC

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix PM usage_count for console handover When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because

osv:DEBIAN-CVE-2022-49613

linux

Fixed versions: 5.18.14-1

linux

Fixed versions: 5.18.14-1

linux

Fixed versions: 5.18.14-1

Complete source record
{
  "id": "356da6e009c7920b236fdea37ab5850621dc0eaf9a898c373deb8e8fbf84ead2",
  "url": "https://osv.dev/vulnerability/DEBIAN-CVE-2022-49613",
  "method": "structured",
  "payload": {
    "kind": "advisory",
    "title": "DEBIAN-CVE-2022-49613",
    "summary": "In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix PM usage_count for console handover When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because",
    "evidence": "osv:DEBIAN-CVE-2022-49613",
    "products": [
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/0/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.18.14-1",
            "evidence": "/affected/0/ranges"
          }
        ],
        "affected_versions": []
      },
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/1/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.18.14-1",
            "evidence": "/affected/1/ranges"
          }
        ],
        "affected_versions": []
      },
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/2/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.18.14-1",
            "evidence": "/affected/2/ranges"
          }
        ],
        "affected_versions": []
      }
    ],
    "severity": "medium",
    "structured": {
      "id": "DEBIAN-CVE-2022-49613",
      "aliases": [
        "DEBIAN-CVE-2022-49613"
      ],
      "metrics": [
        {
          "type": "CVSS_V3",
          "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "affected": [
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.18.14-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
            "ecosystem": "Debian:12"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49613.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        },
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.18.14-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
            "ecosystem": "Debian:13"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49613.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        },
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.18.14-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=forky",
            "ecosystem": "Debian:14"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49613.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        }
      ],
      "modified": "2026-10-15T08:03:11.727526196Z",
      "provider": "osv",
      "upstream": [
        "CVE-2022-49613"
      ],
      "references": [
        "https://security-tracker.debian.org/tracker/CVE-2022-49613"
      ]
    },
    "related_cves": [
      {
        "value": "CVE-2022-49613",
        "evidence": "/upstream"
      }
    ],
    "security_relevant": true,
    "severity_evidence": "/severity/0/score"
  },
  "source_id": "core-osv",
  "document_id": 325653,
  "published_at": "2025-02-26T07:01:36.747+00:00"
}