Skip to content
Heist/ feed
Back to feed
MediumFix available

linux — security advisory

Type: advisorySources: OSVAdvisory ID: DEBIAN-CVE-2022-49146

In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore.

Products
linux
Affected versions
Not specified
Fixed versions
5.17.3-1
CVEs
CVE-2022-49146
Confirmed fixed CVEs
Not specified
Updated in this feed
30 Oct 2026, 15:44 UTC · Revision 1

Source evidence

DEBIAN-CVE-2022-49146

core-osv · Original source

Published 26 Feb 2025, 07:00 UTC

In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the "irqpoll" option) Call Trace: dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore.

osv:DEBIAN-CVE-2022-49146

linux

Fixed versions: 5.17.3-1

linux

Fixed versions: 5.17.3-1

linux

Fixed versions: 5.17.3-1

Complete source record
{
  "id": "86c1a72db21d287ebac3b7647a188e22db22df661fdf8f369b4ece42052e3538",
  "url": "https://osv.dev/vulnerability/DEBIAN-CVE-2022-49146",
  "method": "structured",
  "payload": {
    "kind": "advisory",
    "title": "DEBIAN-CVE-2022-49146",
    "summary": "In the Linux kernel, the following vulnerability has been resolved: virtio: use virtio_device_ready() in virtio_device_restore() After waking up a suspended VM, the kernel prints the following trace for virtio drivers which do not directly call virtio_device_ready() in the .restore: PM: suspend exit irq 22: nobody cared (try booting with the \"irqpoll\" option) Call Trace: dump_stack_lvl+0x38/0x49 dump_stack+0x10/0x12 __report_bad_irq+0x3a/0xaf note_interrupt.cold+0xb/0x60 handle_irq_event+0x71/0x80 handle_fasteoi_irq+0x95/0x1e0 __common_interrupt+0x6b/0x110 common_interrupt+0x63/0xe0 asm_common_interrupt+0x1e/0x40 ? __do_softirq+0x75/0x2f3 irq_exit_rcu+0x93/0xe0 sysvec_apic_timer_interrupt+0xac/0xd0 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch_cpu_idle+0x12/0x20 default_idle_call+0x39/0xf0 do_idle+0x1b5/0x210 cpu_startup_entry+0x20/0x30 start_secondary+0xf3/0x100 secondary_startup_64_no_verify+0xc3/0xcb handlers: [<000000008f9bac49>] vp_interrupt [<000000008f9bac49>] vp_interrupt Disabling IRQ #22 This happens because we don't invoke .enable_cbs callback in virtio_device_restore(). That callback is used by some transports (e.g. virtio-pci) to enable interrupts. Let's fix it, by calling virtio_device_ready() as we do in virtio_dev_probe(). This function calls .enable_cts callback and sets DRIVER_OK status bit. This fix also avoids setting DRIVER_OK twice for those drivers that call virtio_device_ready() in the .restore.",
    "evidence": "osv:DEBIAN-CVE-2022-49146",
    "products": [
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/0/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.17.3-1",
            "evidence": "/affected/0/ranges"
          }
        ],
        "affected_versions": []
      },
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/1/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.17.3-1",
            "evidence": "/affected/1/ranges"
          }
        ],
        "affected_versions": []
      },
      {
        "name": {
          "value": "linux",
          "evidence": "/affected/2/package/name"
        },
        "prerequisites": [],
        "fixed_versions": [
          {
            "value": "5.17.3-1",
            "evidence": "/affected/2/ranges"
          }
        ],
        "affected_versions": []
      }
    ],
    "severity": "medium",
    "structured": {
      "id": "DEBIAN-CVE-2022-49146",
      "aliases": [
        "DEBIAN-CVE-2022-49146"
      ],
      "metrics": [
        {
          "type": "CVSS_V3",
          "score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
        }
      ],
      "affected": [
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.17.3-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
            "ecosystem": "Debian:12"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49146.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        },
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.17.3-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
            "ecosystem": "Debian:13"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49146.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        },
        {
          "ranges": [
            {
              "type": "ECOSYSTEM",
              "events": [
                {
                  "introduced": "0"
                },
                {
                  "fixed": "5.17.3-1"
                }
              ]
            }
          ],
          "package": {
            "name": "linux",
            "purl": "pkg:deb/debian/linux?arch=source&distro=forky",
            "ecosystem": "Debian:14"
          },
          "database_specific": {
            "source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49146.json"
          },
          "ecosystem_specific": {
            "urgency": "not yet assigned"
          }
        }
      ],
      "modified": "2026-10-15T08:03:15.314976584Z",
      "provider": "osv",
      "upstream": [
        "CVE-2022-49146"
      ],
      "references": [
        "https://security-tracker.debian.org/tracker/CVE-2022-49146"
      ]
    },
    "related_cves": [
      {
        "value": "CVE-2022-49146",
        "evidence": "/upstream"
      }
    ],
    "security_relevant": true,
    "severity_evidence": "/severity/0/score"
  },
  "source_id": "core-osv",
  "document_id": 325866,
  "published_at": "2025-02-26T07:00:51.793+00:00"
}