swiotlb: use the adjusted address for the highmem page lookup
In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does.
- Products
- Kernel
- Affected versions
- Not specified
- Fixed versions
- 6.12.112, 6.18.54, 7.2.8
- CVEs
- CVE-2026-98254
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 4 Nov 2026, 15:53 UTC · Revision 1
Source evidence
swiotlb: use the adjusted address for the highmem page lookup
core-osv · Original sourcePublished 6 Oct 2026, 08:45 UTC
In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does.
osv:CVE-2026-98254
Kernel
Fixed versions: 6.12.112, 6.18.54, 7.2.8
Complete source record
{
"id": "4bef4439b4d055ced4885ad90f8b038bb72ba3194a203b9c89aee90b70ed9877",
"url": "https://osv.dev/vulnerability/CVE-2026-98254",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "swiotlb: use the adjusted address for the highmem page lookup",
"summary": "In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug already does.",
"evidence": "osv:CVE-2026-98254",
"products": [
{
"name": {
"value": "Kernel",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.12.112",
"evidence": "/affected/1/ranges"
},
{
"value": "6.18.54",
"evidence": "/affected/1/ranges"
},
{
"value": "7.2.8",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
}
],
"severity": "high",
"structured": {
"id": "CVE-2026-98254",
"aliases": [
"CVE-2026-98254"
],
"metrics": [
{
"type": "CVSS_V3",
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H"
}
],
"affected": [
{
"ranges": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "5f89468e2f060031cd89fd4287298e0eaf246bf6"
},
{
"fixed": "6e53b4d6afbde626255805d438cabb1cac482445"
},
{
"fixed": "aa4709813b29db89f2307f968db5d24925dcdeb1"
},
{
"fixed": "0219b72f5c209732b2f03a8cc0d7240b5e428a99"
},
{
"fixed": "b7d7914a9ae3097e63d113007e4fb44d33d515b1"
}
]
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "5.10.47"
},
{
"fixed": "5.11"
}
]
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "5.12.14"
},
{
"fixed": "5.13"
}
]
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "e6108147dd91b94d1979b110f265710c254c99d5"
}
]
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "e77b796eb9b7ca3c1c0d574d0c155f55b59ca8d5"
}
]
}
],
"versions": [
"v5.10.272",
"v5.10.271",
"v5.10.270",
"v5.10.269",
"v5.10.268",
"v5.10.267",
"v5.10.266",
"v5.10.265",
"v5.10.264",
"v5.10.263",
"v5.10.262",
"v5.10.261",
"v5.10.260",
"v5.10.259",
"v5.10.258",
"v5.10.257",
"v5.10.256",
"v5.10.255",
"v5.10.254",
"v5.10.253",
"v5.10.252",
"v5.10.251",
"v5.10.250",
"v5.10.249",
"v5.10.248",
"v5.10.247",
"v5.10.246",
"v5.10.245",
"v5.10.244",
"v5.10.243",
"v5.10.242",
"v5.10.241",
"v5.10.240",
"v5.10.239",
"v5.10.238",
"v5.10.237",
"v5.10.236",
"v5.10.235",
"v5.10.234",
"v5.10.233",
"v5.10.232",
"v5.10.231",
"v5.10.230",
"v5.10.229",
"v5.10.228",
"v5.10.227",
"v5.10.226",
"v5.10.225",
"v5.10.224",
"v5.10.223",
"v5.10.222",
"v5.10.221",
"v5.10.220",
"v5.10.219",
"v5.10.218",
"v5.10.217",
"v5.10.216",
"v5.10.215",
"v5.10.214",
"v5.10.213",
"v5.10.212",
"v5.10.211",
"v5.10.210",
"v5.10.209",
"v5.10.208",
"v5.10.207",
"v5.10.206",
"v5.10.205",
"v5.10.204",
"v5.10.203",
"v5.10.202",
"v5.10.201",
"v5.10.200",
"v5.10.199",
"v5.10.198",
"v5.10.197",
"v5.10.196",
"v5.10.195",
"v5.10.194",
"v5.10.193",
"v5.10.192",
"v5.10.191",
"v5.10.190",
"v5.10.189",
"v5.10.188",
"v5.10.187",
"v5.10.186",
"v5.10.185",
"v5.10.184",
"v5.10.183",
"v5.10.182",
"v5.10.181",
"v5.10.180",
"v5.10.179",
"v5.10.178",
"v5.10.177",
"v5.10.176",
"v5.10.175",
"v5.10.174",
"v5.10.173",
"v5.10.172",
"v5.10.171",
"v5.10.170",
"v5.10.169",
"v5.10.168",
"v5.10.167",
"v5.10.166",
"v5.10.165",
"v5.10.164",
"v5.10.163",
"v5.10.162",
"v5.10.161",
"v5.10.160",
"v5.10.159",
"v5.10.158",
"v5.10.157",
"v5.10.156",
"v5.10.155",
"v5.10.154",
"v5.10.153",
"v5.10.152",
"v5.10.151",
"v5.10.150",
"v5.10.149",
"v5.10.148",
"v5.10.147",
"v5.10.146",
"v5.10.145",
"v5.10.144",
"v5.10.143",
"v5.10.142",
"v5.10.141",
"v5.10.140",
"v5.10.139",
"v5.10.138",
"v5.10.137",
"v5.10.136",
"v5.10.135",
"v5.10.134",
"v5.10.133",
"v5.10.132",
"v5.10.131",
"v5.10.130",
"v5.10.129",
"v5.10.128",
"v5.10.127",
"v5.10.126",
"v5.10.125",
"v5.10.124",
"v5.10.123",
"v5.10.122",
"v5.10.121",
"v5.10.120",
"v5.10.119",
"v5.10.118",
"v5.10.117",
"v5.10.116",
"v5.10.115",
"v5.10.114",
"v5.10.113",
"v5.10.112",
"v5.10.111",
"v5.10.110",
"v5.10.109",
"v5.10.108",
"v5.10.107",
"v5.10.106",
"v5.10.105",
"v5.10.104",
"v5.10.103",
"v5.10.102",
"v5.10.101",
"v5.10.100",
"v5.10.99",
"v5.10.98",
"v5.10.97",
"v5.10.96",
"v5.10.95",
"v5.10.94",
"v5.10.93",
"v5.10.92",
"v5.10.91",
"v5.10.90",
"v5.10.89",
"v5.10.88",
"v5.10.87",
"v5.10.86",
"v5.10.85",
"v5.10.84",
"v5.10.83",
"v5.10.82",
"v5.10.81",
"v5.10.80",
"v5.10.79",
"v5.10.78",
"v5.10.77",
"v5.10.76",
"v5.10.75",
"v5.10.74",
"v5.10.73",
"v5.10.72",
"v5.10.71",
"v5.10.70",
"v5.10.69",
"v5.10.68",
"v5.10.67",
"v5.10.66",
"v5.10.65",
"v5.10.64",
"v5.10.63",
"v5.10.62",
"v5.10.61",
"v5.10.60",
"v5.10.59",
"v5.10.58",
"v5.10.57",
"v5.10.56",
"v5.10.55",
"v5.10.54",
"v5.10.53",
"v5.10.52",
"v5.10.51",
"v5.10.50",
"v5.10.49",
"v5.10.48",
"v5.10.47",
"v5.12.19",
"v5.12.18",
"v5.12.17",
"v5.12.16",
"v5.12.15",
"v5.12.14"
],
"database_specific": {
"source": "https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2026-98254.json"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "5.13.0"
},
{
"fixed": "6.12.112"
}
]
},
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "6.13.0"
},
{
"fixed": "6.18.54"
}
]
},
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "6.19.0"
},
{
"fixed": "7.2.8"
}
]
}
],
"package": {
"name": "Kernel",
"ecosystem": "Linux"
},
"database_specific": {
"source": "https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2026-98254.json"
}
}
],
"modified": "2026-10-28T02:30:36.793810579Z",
"provider": "osv",
"references": [
"https://git.kernel.org/stable/c/0219b72f5c209732b2f03a8cc0d7240b5e428a99",
"https://git.kernel.org/stable/c/6e53b4d6afbde626255805d438cabb1cac482445",
"https://git.kernel.org/stable/c/aa4709813b29db89f2307f968db5d24925dcdeb1",
"https://git.kernel.org/stable/c/b7d7914a9ae3097e63d113007e4fb44d33d515b1",
"https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/98xxx/CVE-2026-98254.json",
"https://nvd.nist.gov/vuln/detail/CVE-2026-98254",
"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git"
],
"provider_metadata": {
"cna_assigner": "Linux",
"osv_generated_from": "https://github.com/CVEProject/cvelistV5/tree/main/cves/2026/98xxx/CVE-2026-98254.json"
}
},
"related_cves": [
{
"value": "CVE-2026-98254",
"evidence": "/id"
}
],
"security_relevant": true,
"severity_evidence": "/severity/0/score"
},
"source_id": "core-osv",
"document_id": 504326,
"published_at": "2026-10-06T08:45:20.736+00:00"
}