scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() The following call trace was observed: localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092 localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291" localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1 localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022 localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core] localhost kernel: Call Trace: localhost kernel: dump_stack_lvl+0x57/0x7d localhost kernel: check_preemption_disabled+0xc8/0xd0 localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] Use raw_smp_processor_id() instead of smp_processor_id(). Also use queue_work() across the driver instead of queue_work_on() thus avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled.
- Products
- Kernel
- Affected versions
- Not specified
- Fixed versions
- 6.5.5
- CVEs
- CVE-2023-53530
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 3 Nov 2026, 03:37 UTC · Revision 1
Source evidence
scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
core-osv · Original sourcePublished 1 Oct 2025, 11:46 UTC
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() The following call trace was observed: localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092 localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN "nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291" localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1 localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022 localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core] localhost kernel: Call Trace: localhost kernel: dump_stack_lvl+0x57/0x7d localhost kernel: check_preemption_disabled+0xc8/0xd0 localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] Use raw_smp_processor_id() instead of smp_processor_id(). Also use queue_work() across the driver instead of queue_work_on() thus avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled.
osv:CVE-2023-53530
Kernel
Fixed versions: 6.5.5
Complete source record
{
"id": "8bf0caa67b80b1b57fb56be8bd50b42b136853fff7ede111707408a84b03531e",
"url": "https://osv.dev/vulnerability/CVE-2023-53530",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()",
"summary": "In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id() The following call trace was observed: localhost kernel: nvme nvme0: NVME-FC{0}: controller connect complete localhost kernel: BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u129:4/75092 localhost kernel: nvme nvme0: NVME-FC{0}: new ctrl: NQN \"nqn.1992-08.com.netapp:sn.b42d198afb4d11ecad6d00a098d6abfa:subsystem.PR_Channel2022_RH84_subsystem_291\" localhost kernel: caller is qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] localhost kernel: CPU: 6 PID: 75092 Comm: kworker/u129:4 Kdump: loaded Tainted: G B W OE --------- --- 5.14.0-70.22.1.el9_0.x86_64+debug #1 localhost kernel: Hardware name: HPE ProLiant XL420 Gen10/ProLiant XL420 Gen10, BIOS U39 01/13/2022 localhost kernel: Workqueue: nvme-wq nvme_async_event_work [nvme_core] localhost kernel: Call Trace: localhost kernel: dump_stack_lvl+0x57/0x7d localhost kernel: check_preemption_disabled+0xc8/0xd0 localhost kernel: qla_nvme_post_cmd+0x216/0x1380 [qla2xxx] Use raw_smp_processor_id() instead of smp_processor_id(). Also use queue_work() across the driver instead of queue_work_on() thus avoiding usage of smp_processor_id() when CONFIG_DEBUG_PREEMPT is enabled.",
"evidence": "osv:CVE-2023-53530",
"products": [
{
"name": {
"value": "Kernel",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.5.5",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
}
],
"severity": "unknown",
"structured": {
"id": "CVE-2023-53530",
"aliases": [
"CVE-2023-53530"
],
"affected": [
{
"ranges": [
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "532a239605667320f4fd7473e416b718d0a2fbbb"
},
{
"fixed": "1a541999f31fcb10ea50eba2a563e6c451fd5c7d"
}
]
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "35c02a333d523d9da0b482b0d751cdeb95c068ae"
},
{
"fixed": "52c7b41ad6ee53222f4ee2f0c099a6ed8291a168"
}
]
},
{
"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
"type": "GIT",
"events": [
{
"introduced": "1d201c81d4cc6840735bbcc99e6031503e5cf3b8"
},
{
"fixed": "25bd0c7def04a272f8e89b36971712fe29c6e438"
},
{
"fixed": "59f10a05b5c7b675256a66e3161741239889ff80"
}
]
}
],
"database_specific": {
"source": "https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2023-53530.json"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "6.3.0"
},
{
"fixed": "6.5.5"
}
]
}
],
"package": {
"name": "Kernel",
"ecosystem": "Linux"
},
"database_specific": {
"source": "https://storage.googleapis.com/cve-osv-conversion/osv-output/CVE-2023-53530.json"
}
}
],
"modified": "2026-10-28T02:30:26.082077952Z",
"provider": "osv",
"references": [
"https://git.kernel.org/stable/c/1a541999f31fcb10ea50eba2a563e6c451fd5c7d",
"https://git.kernel.org/stable/c/25bd0c7def04a272f8e89b36971712fe29c6e438",
"https://git.kernel.org/stable/c/52c7b41ad6ee53222f4ee2f0c099a6ed8291a168",
"https://git.kernel.org/stable/c/59f10a05b5c7b675256a66e3161741239889ff80",
"https://github.com/CVEProject/cvelistV5/tree/main/cves/2023/53xxx/CVE-2023-53530.json",
"https://nvd.nist.gov/vuln/detail/CVE-2023-53530",
"https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git"
],
"provider_metadata": {
"cna_assigner": "Linux",
"osv_generated_from": "https://github.com/CVEProject/cvelistV5/tree/main/cves/2023/53xxx/CVE-2023-53530.json"
}
},
"related_cves": [
{
"value": "CVE-2023-53530",
"evidence": "/id"
}
],
"security_relevant": true,
"severity_evidence": null
},
"source_id": "core-osv",
"document_id": 492236,
"published_at": "2025-10-01T11:46:15.075+00:00"
}