linux — security advisory
In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has bee
- Products
- linux
- Affected versions
- Not specified
- Fixed versions
- 6.1.25-1
- CVEs
- CVE-2023-53054
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 1 Nov 2026, 16:13 UTC · Revision 1
Source evidence
In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has bee
osv:DEBIAN-CVE-2023-53054
linux
Fixed versions: 6.1.25-1
linux
Fixed versions: 6.1.25-1
linux
Fixed versions: 6.1.25-1
Complete source record
{
"id": "3fd1d22b5661012bd31e12e405cdbdd7186b1240a90108000025f6dfb4960da5",
"url": "https://osv.dev/vulnerability/DEBIAN-CVE-2023-53054",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "DEBIAN-CVE-2023-53054",
"summary": "In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: fix a devres leak in hw_enable upon suspend resume Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new \"ADD\" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the \"hsotg->ll_hw_enabled\" flag. Checking dr_mode has bee",
"evidence": "osv:DEBIAN-CVE-2023-53054",
"products": [
{
"name": {
"value": "linux",
"evidence": "/affected/0/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.1.25-1",
"evidence": "/affected/0/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.1.25-1",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/2/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "6.1.25-1",
"evidence": "/affected/2/ranges"
}
],
"affected_versions": []
}
],
"severity": "medium",
"structured": {
"id": "DEBIAN-CVE-2023-53054",
"aliases": [
"DEBIAN-CVE-2023-53054"
],
"metrics": [
{
"type": "CVSS_V3",
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
}
],
"affected": [
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "6.1.25-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
"ecosystem": "Debian:12"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2023-53054.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "6.1.25-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
"ecosystem": "Debian:13"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2023-53054.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "6.1.25-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=forky",
"ecosystem": "Debian:14"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2023-53054.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
}
],
"modified": "2026-10-26T18:02:51.711641491Z",
"provider": "osv",
"upstream": [
"CVE-2023-53054"
],
"references": [
"https://security-tracker.debian.org/tracker/CVE-2023-53054"
]
},
"related_cves": [
{
"value": "CVE-2023-53054",
"evidence": "/upstream"
}
],
"security_relevant": true,
"severity_evidence": "/severity/0/score"
},
"source_id": "core-osv",
"document_id": 457056,
"published_at": "2025-05-02T16:15:24.483+00:00"
}