linux — security advisory
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.
- Products
- linux
- Affected versions
- Not specified
- Fixed versions
- 5.17.3-1
- CVEs
- CVE-2022-49200
- Confirmed fixed CVEs
- Not specified
- Updated in this feed
- 30 Oct 2026, 15:38 UTC · Revision 1
Source evidence
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.
osv:DEBIAN-CVE-2022-49200
linux
Fixed versions: 5.17.3-1
linux
Fixed versions: 5.17.3-1
linux
Fixed versions: 5.17.3-1
Complete source record
{
"id": "bbdd03b30b5f077ea58bd5e9601ef9141c4cfbeb6059741336311e0d19cc8101",
"url": "https://osv.dev/vulnerability/DEBIAN-CVE-2022-49200",
"method": "structured",
"payload": {
"kind": "advisory",
"title": "DEBIAN-CVE-2022-49200",
"summary": "In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interrupt Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer.",
"evidence": "osv:DEBIAN-CVE-2022-49200",
"products": [
{
"name": {
"value": "linux",
"evidence": "/affected/0/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.17.3-1",
"evidence": "/affected/0/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/1/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.17.3-1",
"evidence": "/affected/1/ranges"
}
],
"affected_versions": []
},
{
"name": {
"value": "linux",
"evidence": "/affected/2/package/name"
},
"prerequisites": [],
"fixed_versions": [
{
"value": "5.17.3-1",
"evidence": "/affected/2/ranges"
}
],
"affected_versions": []
}
],
"severity": "medium",
"structured": {
"id": "DEBIAN-CVE-2022-49200",
"aliases": [
"DEBIAN-CVE-2022-49200"
],
"metrics": [
{
"type": "CVSS_V3",
"score": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H"
}
],
"affected": [
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.17.3-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=bookworm",
"ecosystem": "Debian:12"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49200.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.17.3-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=trixie",
"ecosystem": "Debian:13"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49200.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
},
{
"ranges": [
{
"type": "ECOSYSTEM",
"events": [
{
"introduced": "0"
},
{
"fixed": "5.17.3-1"
}
]
}
],
"package": {
"name": "linux",
"purl": "pkg:deb/debian/linux?arch=source&distro=forky",
"ecosystem": "Debian:14"
},
"database_specific": {
"source": "https://storage.googleapis.com/debian-osv/debian-cve-osv/DEBIAN-CVE-2022-49200.json"
},
"ecosystem_specific": {
"urgency": "not yet assigned"
}
}
],
"modified": "2026-10-15T08:03:10.362747633Z",
"provider": "osv",
"upstream": [
"CVE-2022-49200"
],
"references": [
"https://security-tracker.debian.org/tracker/CVE-2022-49200"
]
},
"related_cves": [
{
"value": "CVE-2022-49200",
"evidence": "/upstream"
}
],
"security_relevant": true,
"severity_evidence": "/severity/0/score"
},
"source_id": "core-osv",
"document_id": 325514,
"published_at": "2025-02-26T07:00:57.067+00:00"
}